PRE-SCREENING FEEDER
- A robust sheet metal box with a set of linings on the front side;
- A vibrating unit composed of two motovibrators, attached to the box, promotes an inclined linear vibratory movement which results in a channelled and regular advance of the materials;;
- The flow rate can be adjusted and varies in line with the position of the motovibrators’ counterweights;
- Models: 35.08/ 40.09 / 40.10 / 40.11/ 50.11 / 50.13
VIBRATING SCREEN
- Shock-absorbing blocks for start-up and stopping;
- Helical springs;
Prepared to accommodate washing systems for crushed products; - Distributor box at the feeding point with Hardox panel for shock absorption;
- Screening capacity up to 150mm;
- Models: 20.10 / 30.13 / 40.13 / 40.15 / 45.18 / 50.20 / 60.20
VIBRATING FEEDER
- Board lined with a 6mm 450HB steel plate;
- Suspension system with coil springs;
- Gusset plate for connecting to the concrete or to the regulating hopper;
- Two adjustable motovibrators;
- The flow rate can be adjusted by varying the positioning of the counterweights on the vibration motors;
- Models: 60.105 / 70.120 / 80.120 / 80.135 / 100.135 / 100.165 / 120.19 / 120.220 / 150.220
DRAINING SCREEN
- This type of screen is associated with two variable amplitude motovibrators;
- The flow rate can be adjusted by varying the positioning of the counterweights on the vibration motors;
- Helical springs;
It features an upward longitudinal movement that enables the dewatering of aggregate water;
Models: VA 170 / VA 230 / VA 345 / VA360 / VA 480
GRAVEL WASHER
- Adjustable guiding paddles;
- Drum supported on tyres with safety ring;
- When necessary, equipped with screening cones;
- Washers suitable for pre-washing or removing clay from gravel;
- Models: 13.30 / 15.60 / 16.40 / 16.60 / 20.60 / 25.60
SAND WASHER
- 20% incline;
- Upper oscillating auger support with tapered roller bearings;
- Lower shaft support bearing equipped with retainers;
- Removable wear liners on the auger of the AM 606 / AM 906 models;
- Models: AM 606 L / AM 606 DL / AM 906 L / 906 AM
CONVEYORS
EUROTAM (Standard truss) / TRC (Quenched plate) / UPN / Reinforced truss;
400; 500; 600; 650; 800; 1000; 1200
